Mastercam x6 32位 中文版 安装全程实况
win7系统还是装x5吧
win7 64位的破解方法如下:
4) Install a USB-Win64 Emulator(安装USB-64位 模拟器)
You need a local Administrator rights to install this emulator for Win64!
On Windows Vista64 and Windows7 64-bit you need to boot Windows in mode F8 > Desable Unsigned Drivers Enforcment !!!
(在vista64位和win764位系统上安装这个64位的模拟器,你需要管理员权限啊)
4.1. Reboot computer (for Windows Vista64 and Windows7 64-bit you need to boot Windows in mode F8 > Desable Unsigned Drivers Enforcment !!!)
(开机按F8,关掉未签名驱动程序的禁用,之后重启电脑 )
4.2. Install usb-emulator drivers(安装驱动)
Start -> Control Panel -> Add Hardware (Yes, I have already connected the hardware) -> Add a new hardware device -> Install the hardware that I manually select from a list -> Show all Devices -> Have disk -> Browse -> (browse to folder "USB-Emul_Win64") -> OK -> Confirm to install not certificated drivers if Windows ask for..
(点:开始-控制面板-增加硬件(好,我已经连接上这个设备了)-增加新的硬件设备-安装俺在列表选择的硬件-显示所有设备-从磁盘安装-浏览-(找到USB-Emul_Win64文件)-是-确认安装....)
If setup is succesfull you have to see new system device:
Device Manager -> System devices -> Virtual Usb Bus Enumerator
(要是装上了,你可以看到一个新的系统设备:
设备管理器-系统设备-虚拟USB总线模拟器)
5) Install MC X5 as HASP or NetHASP SIM type.
(安装x5时,选择HASP 或者 NetHASP)
6) Copy Mastercam.exe from crack to <Mastercam X5 progdir> and replace original one
(把破解文件里的Mastercam.exe复制到你软件安装的位置,替换掉原先的)
Mastercam x6 MU2 32位 安装方法――工具/原料001-MasterCAM X6 x6 主程序文件002-MasterCAM X6 mu2升级文件003-MasterCAM X6 MU2 位破解文件004-MasterCAM X6 MU2 汉化文件Mastercam x6 MU2 32位 安装方法――1
Mastercam x6 MU2 32位 安装方法 1、
Mastercam x6 32位 中文版 安装全程实况
win7系统还是装x5吧
win7 64位的破解方法如下:
4) Install a USB-Win64 Emulator(安装USB-64位 模拟器)
You need a local Administrator rights to install this emulator for Win64!
On Windows Vista64 and Windows7 64-bit you need to boot Windows in mode F8 > Desable Unsigned Drivers Enforcment !!!
(在vista64位和win764位系统上安装这个64位的模拟器,你需要管理员权限啊)
4.1. Reboot computer (for Windows Vista64 and Windows7 64-bit you need to boot Windows in mode F8 > Desable Unsigned Drivers Enforcment !!!)
(开机按F8,关掉未签名驱动程序的禁用,之后重启电脑 )
4.2. Install usb-emulator drivers(安装驱动)
Start -> Control Panel -> Add Hardware (Yes, I have already connected the hardware) -> Add a new hardware device -> Install the hardware that I manually select from a list -> Show all Devices -> Have disk -> Browse -> (browse to folder "USB-Emul_Win64") -> OK -> Confirm to install not certificated drivers if Windows ask for..
(点:开始-控制面板-增加硬件(好,我已经连接上这个设备了)-增加新的硬件设备-安装俺在列表选择的硬件-显示所有设备-从磁盘安装-浏览-(找到USB-Emul_Win64文件)-是-确认安装....)
If setup is succesfull you have to see new system device:
Device Manager -> System devices -> Virtual Usb Bus Enumerator
(要是装上了,你可以看到一个新的系统设备:
设备管理器-系统设备-虚拟USB总线模拟器)
5) Install MC X5 as HASP or NetHASP SIM type.
(安装x5时,选择HASP 或者 NetHASP)
6) Copy Mastercam.exe from crack to <Mastercam X5 progdir> and replace original one
(把破解文件里的Mastercam.exe复制到你软件安装的位置,替换掉原先的)
Mastercam x6 MU2 32位 安装方法――注意事项
在运行库安装自检时,不同的电脑会有不同数量的运行库需要安装,其中.NET 4.5安装后要求重新启动电脑,并在重启后自动弹出本软件安装界面运行库安装是,如果有弹窗,提示某某安装失败,不需担心,只是计算机中已安装比本软件自带的运行库版本更高更新,此时点击“是(Y)”继续