CCcam配置文件CCcam.cfg参数简介 activiti.cfg.xml配置

# CCcam team uvadi CCcam #
# Special greets go to Dale Cooper, the RuDream and ofcourseHDLteam
#
# For system without new enigma socket.... capmtserver is yourfriend ;-)
#


######################################################################
#伙伴选项#
######################################################################
# syntax for to add a friend user to CCcam with the max up hopslimit
# sharing of emus (default = 1), allow emm (default = 1), andoptional
# downshare limits per share (default = no limits)
# emus are shared only one level down, even if no limitsgiven
#

#在CCcam中,为一个朋友添加一个共享的语法,带hops参数(hops的概念是找出一网路站所必须作的数个连结动作)
#共享emus(缺省=1),允许emm(缺省=1),可选参数downshare limits pershare(缺省是没有限制)
#即使给出没有限制的定义,emus 共享也仅能向下一个级别


#F: <username> <password> <uphops><shareemus> <allowemm> ( { caid:id(:downhops),caid:id(:downhops),... } )

#举例说明

#F: 用户名 密码 上行连接数目 是否共享emus(空=1=是=提供共享)是否允许emm(空=1=是=允许emm)({CAID:ID(:下行连接数目),依此类推)})
#
# example:
#
# F: mike 123 10
#
# user1 gets all our shares at max 10 hops from us
# (our local cards + max ten hops away). He can share down to hisown
# clients. He also receive emu shares (if he has 'yes' behind hisC: entry),
# and is allowed to send us emm.
#


#用户名为mike,密码为123的朋友得到了你提供的所有的共享,最大连接数目为10个(你本地的卡+最大10个外出连接),他可以向下共享到他自己的客户端
#他同时也可以接收emu共享(如果他定义了命令行C:的权限),并且他可以传送你提供的emm
# F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2}
#
# user2 gets only our local cards but no 0100:000080.
# and our 0622:000000 cards only for himself (1 hop down),
# and 0500 cards for himself plus one additional hop down.
# He also gets our emus, and is NOT allowed to send us emm(updates).
#

#用户user2 仅得到了你提供的本地卡除了0100:000080(这里的0100是CAID,加密系统的一个公开代码,000080是频道提供商的代码)
#得到了你提供的卡的0622:000000数据,但是只有一个下行链路,只能他自己使用,可以共享你的emus,但是不能穿回emm数据(不能更新)
# F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }
#
# user3 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his ownlevel.
# But he is not allowed to share 0100:000080 down to otherusers.
# He gets no emus from us, and he is allowed to send us emm.


######################################################################
#连接选项#
######################################################################
# syntax for to add a client connection to other CCcam
# add yes on end to use friends emus (non public privatekey/emu,etc...),
# but only works when corresponding F line on server has '1' for<shareemus>
#

#添加一个客户端连接到其他的CCcam的语法,末尾加yes的话可以使用朋友的mus(非公共私用秘匙/emu等)
#只能在 F命令行shareemus有效(=1)的前提下使用
#C: <hostname> <port> <username> <password><wantemus>
#
#C: 主机名 端口用户名密码是否使用朋友的emus(yes或空,空=不使用)
# example:
#
# C: someserver.somedomain 12000 user1 pass1
# C: 192.168.1.2 12000 user2 pass2
# connects to CCcam without use of friends emus
#
# C: 192.168.1.2 12000 mike 123yes
# connects to CCcam, and receives friends emus also.

#-----------------以下是连接到其他协议共享服务器的语法------------------
# syntax for to add newcamd serverconnection连接到newcamd服务器的语法
#
#N: <ip> <port> <username> <pass><des(14byte)> <nr_of_hops_away (default: 1)>
#
# example:
#
# N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 1112 13 14

#很简单,不用在介绍了

# 连接到radegast 服务器
#
#R: <ip> <port> <ca4> <id6><nr_of_hops_away (default: 1)>
#
# example:
#
# R: 127.0.0.1 678 0100 000080

#R:IP地址或域名(空格)端口(空格)CAID,四个代表加密系统的字符(空格)6个代表频道组的字符(空格)hop参数
# 连接到 camd3 服务器
#
#L: <ip> <port> <username> <pass><ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example: 与上面相同,多了用户名和密码
#
# L: 127.0.0.1 567 dummy dummy 0100 000080

#-----------------以上是连接到其他协议共享服务器的语法------------------


######################################################################
#其他连接设置#
######################################################################
# server shall listen on this port pro incomingconnections 监听端口
# default port is 12000, disable server with parm -s
#
#SERVER LISTEN PORT : 12000

# server can give some info about server and clientconnections客户端连进和卡信息监听端口
# and cardinfo

# default port is 16000
# supported commands:
#info
#activeclients
#clients
#servers
#shares
#providers
#entitlements
# example use: echo servers | telnet localhost16000命令行语法格式
#
#INFO LISTEN PORT : 16000

# same info also available in your browser
# go with your browser to http://ip_CCcam_server:16001
#提供web界面了解服务器参数
HTML INFO LISTEN PORT : 16001


####################################
#打算取消的设置,下个版本将取消,功能合并到shell/web界面#
# will be removed in nextrelease #
# use shell/web interfaceabove#
####################################

# some listening tcp port for info:
# all ports below will be gone in next release
# start using command interface in your scripts
#
# card info
# CARD INFO PORT : 14000

# online clients
# ONLINE CLIENTS PORT : 15000

# online clients
# ONLINE ACTIVE CLIENTS PORT : 15004

# online connections
# ONLINE CONNECTIONS PORT : 15001

# online shares
# ONLINE SHARES PORT : 15002

# supported providers in shares
# ONLINE PROVIDERS PORT : 15003

####################################
# ENDDEPRECATED#
####################################

# time in seconds to keep On Screen Displayactive.屏幕显示信息的暂留时间
# default is 0 (turned off)
#
#ZAP OSD TIME : 3


# Serial path to phoenix reader. Add as many as you have attachedtoo yoursystem串口读卡器的路径
# default is none
# optionally add readertype : phoenix,mouse,uniprog
# (when non readertype given defaults to uniprog (e.g. formastera))
#
#Phoenix Reader Path : <device> <type>
#
# example
#
#PHOENIX READER PATH : /dev/tts/0


# if timing should be shown in OSD and debug output
# default is no (turned off)
#
#SHOW TIMING : yes


# turns debugging on and off
# default is no (turned off)
#
#DEBUG : yes


# should CCcam try to read and parse newcamd.conf for serverconnections是否读取newcamd的配置文件(可通过这个方式连接到newcamd服务器)
# default is no (turned off)
#
#NEWCAMD CONF : yes


# configure what EMM blocker you want. Add as many as readers youhaveattachedblocker选项
# default is blocking nothing
#
# B: /dev/sci0 01
#00 - nothing
#01 - sa blocked
#02 - ua blocked
#04 - ga blocked
#and sum of for combinations
#
#examples
#
#B: /dev/tts/0 07
#B: /dev/sci0 01

# disable all local EMMreaders禁止本地的EMM
# saves lots of CPU, but you won't get any updatesanymore节省CPU
# (unless you get updates from your clients)
#
# default: no
#
#DISABLE EMM : yes

# overrule the nds boxkey (4 bytehex)NDS用的BOX KEY
#
# BOXKEY: <device> <byte1> <byte2> <byte3><byte4>
#
#example
#
#BOXKEY: /dev/sci0 00 11 22 33

# what Softcam.Key should CCcam try toread已经破截的key文件目录
# defaults to /var/keys/SoftCam.Key
#
#SOFTKEY FILE : /var/keys/SoftCam.Key


# what AutoRoll.Key should CCcam try toread
# defaults to /var/keys/AutoRoll.Key
#
#AUTOROLL FILE : /var/keys/AutoRoll.Key


# what constant.cw should CCcam try toreadCW格式
# defaults to /var/keys/constant.cw
# file content can be like
#
# ca4:id6:sid4:pmtpid4:ecmpid4:key16(01 02 03...)
#
#STATIC CW FILE : /var/keys/constant.cw


# in this file you can configure what CAIDs CCcam shouldignore需要忽略的CAID,一个频道采用多系统加密时候,可保证cccam使用正确的CAID,例如目前的艺华直播
# defaults to /var/keys/CCcam.ignore
# file content can be like
#
# I: ca4 id6ignore allways this caid/ident
# S: ca4 id6 sid4 ignorecaid/ident only on sid
#
#CAID IGNORE FILE : /var/keys/CCcam.ignore


# write wrong logins tofile记录错误登陆文件
# defaults is off
#
#LOG WARNINGS : /tmp/warnings.txt

# stealthy login to newcamd/newcs server, identify asmgcamd
# default: no
#冒充mgcamd登陆newcamd/newcs 服务器
#NEWCAMD STEALTH : yes

  

爱华网本文地址 » http://www.413yy.cn/a/25101017/363532.html

更多阅读

iso文件怎么安装系统 iso文件用u盘怎么安装

iso文件怎么安装系统——简介目前有一部分系统文件采用iso格式进行压缩,对于此类文件安装系统时,需要进行解压,或者创建虚拟光驱才能正常安装系统。下面小编就具体与大家分享一下利用iso格式文件安装系统的具体方法。iso文件怎么安装

怎么制作文件夹背脊? 文件夹背脊

怎么制作文件夹背脊?——简介对文件进行归档处理时候,都需要在文件盒添加文件背脊,那背脊该怎么制作呢?怎么制作文件夹背脊?——工具/原料excel怎么制作文件夹背脊?——方法/步骤怎么制作文件夹背脊? 1、鼠标在桌面点击右键,创建一个excel

php文件用什么打开 php种子

php文件用什么打开——简介我们无意中在互联网上会下载各种文件下来,有些都不知道是什么意思的,更不知道怎么去打开这些文件,比如有人下载了php文件时,就会不知道怎么打开了。Php文件是一种程序代码文件,如果不懂的人会不知怎么用,但有时

酷狗的皮肤文件存放在哪 酷狗皮肤图片

酷狗的皮肤文件存放在哪——简介为了吸引用户,播放器一般都制作了精美的皮肤文件。有很多人都很喜欢这些皮肤,甚至想要“据为己有”,问题是酷狗的皮肤文件存放在哪儿了。好的,现在我就带领大家去寻找美丽的皮肤。以我在百度知道上遇到的

电脑文件如何粉碎? 电脑管家文件粉碎

电脑文件如何粉碎?——简介当今互联网时代,技术的发展日新月异,电脑隐私的保护更是一大难题。那么,我们在洁身自爱的同时,还有没有办法保护电脑隐私呢?一些重要的或者私密文件,如何进行有效的粉碎呢?电脑文件如何粉碎?——工具/原料电脑已

声明:《CCcam配置文件CCcam.cfg参数简介 activiti.cfg.xml配置》为网友凉心凉意凉少年分享!如侵犯到您的合法权益请联系我们删除