爱华网发个资料，应该有人用的着。
第1插座, 8针. 扬声器输出
1–Rear rightloudspeaker, positive 后右扬声器, 正极
2 –Front rightloudspeaker, positive 前右扬声器, 正极
3 –Front left loudspeaker,positive 前左扬声器, 正极
4 –Rear left loudspeaker,positive 后左扬声器, 正极
5 –Rear rightloudspeaker, negative后右扬声器, 负极
6 –Front rightloudspeaker, negative前右扬声器, 负极
7 –Front left loudspeaker,negative前左扬声器, 负极
8 –Rear left loudspeaker,negative 后左扬声器, 负极
第2个插座,8针, 电源电压和CAN线
9–CAN bus, highCAN线高
10–CAN bus, low CAN低
11–Display voltage supply,positive, optional for radio module low versiononly
12–Voltage supply, negative,terminal 31 电源负极
13–Display HV CAN bus low,optional for radio module low version only, not formidline
14–Display HV CAN bus high,optional for radio module low version only, not formidline
15–Voltage supply, positive,terminal 30 电源正极
16–Anti-theft coding controlsignal, SAFE, positive电源正极（防盗码控制）
第3插座,12针，电话和话筒
1–Microphone input,negative 话筒输入负极
2–AUX output, audio,rightAUX输出, 音频, 右
3–AUX output, common signalearthAUX输出,公用地
4–Microphone output,negative话筒输出,负极
5–Telephone audio input signalleft, negative 电话音频输入, 左, 负极
6–Telephone audio input signalright, negative 电话音频输入, 右, 负极
7–Microphone input,positive话筒输入,正极
8–AUX output, audio,leftAUX输出,音频, 左
9–Microphone output,positive 话筒输出, 正极
10–Telephone mute (mute switchfor radio) 电话静音
11–Telephone audio input signalleft, positive 电话音频输入, 左, 正极
12–Telephone audio input signalright, positive 电话音频输入, 右, 正极
第4插座,12针, CD转换器和CD音频输入
1–AUX signal input, leftAUX信号输入，左
2 –AUX signal earth AUX信号，地
3 –CD changer, audio signalearth CD变换器，音频信号地
4 –CD changer, voltage supply,positive, terminal 30, contact continuous load greater than 1 A,temporary peak load 5 A
电源正极
5 –Not assigned
6 –CD changer, DATA OUT (dataexchange for CD changer control from radio navigation system to CDchanger)数据输出
7 –AUX signal input,rightAUX信号输入，右
8 –CD changer, left audiochannel, CD/L 左声道
9 –CD changer, right audiochannel, CD/R右声道
10 –CD changer, control line,switched positive控制线
11 –CD changer, DATA IN (dataexchange for CD changer control from CD changer to radio navigationsystem)数据出
12 –CD changer, CLOCK (internalcheck protocol for data flow monitoring) 时钟信号
第5插座，26针，视频输入输出
1–Reserved for Debug RX protocol保留，调试用
2 –Reserved for Debug TXprotocol 保留，调试用
3 –Not assigned 未分配
4 –Video signal input, RGBS,negative (ground) 视频输入，RGBS，负极（地）
5 –Video signal output LF,Right (Audio use 17 forground)音频输出，右（17为地）
6 – Ground Sync input
(Internal universal preparation for mobile telephone, mobiletelephone detection)
7 – Video signal output,vertical and horizontal synchronisation 视频输出，水平垂直同步
(Internal universal preparation for mobile telephone, cradle andbutton evaluation)
8 – Video signal ouput, green视频输出，绿色
(Internal universal preparation for mobile telephone, cradle,aerial diagnosis)
9 –Video signal input, RGBS,negative (ground)
10 –Video signal input LF,right(Audio use 24 for ground)音频输入， 右（24为地）
11 –Video signal input,screening earth 视频输入，屏蔽地
12 –Video signal input,vertical and horizontal synchronisation 视频输入，水平垂直同步
13 –Video signal input, green视频输入，绿色
14 –Not assigned 未分配
15 –Not assigned 未分配
16 –Not assigned 未分配
17 - Video signal output, LF, negative (ground) 音频输出，负极（地）
18 –Video signal output LF,Left(Audio use 17 for ground)音频输出，左（音频17为地）
19 –Video signal output, RGBS,negative (ground)
(Internal universal preparation for mobile telephone, cradle,negative)
20 –Video signal output, Blue视频输出，蓝色
(Internal universal preparation for mobile telephone, switchedterminal 30)
21 –Video signal output, Red视频输出，红色
22 –Video signal input, LF,negative
23 –Video signal input, LF,left (Audio use 24 for ground) 音频输入，左（音频24为地）
24 –Video signal input, RGBS,negative (ground)
25 –Video signal input, blue视频输入，蓝色
26 –Video signal input, red视频输入，红色
第 6 插座，天线连接
1–AM and FM2 radio receptionaerial connector, double Fakra, no coding, impedance 50 ohms,colour cream-white (奶白插头无代码)
2–FM1 radio reception aerialconnector, double Fakra, coding B, impedance 50 ohms, colourcream-white(奶白插头代码B)
3–Navigation aerial connector,double Fakra, coding C, impedance 50 ohms, colour signal blueGPS插座
